Users Guide

in (OPTIONAL) Enter the keyword in to view only information on inbound BGP
routes.
out (OPTIONAL) Enter the keyword out to view only information on outbound BGP
routes.
A.B.C.D Enter the IP address of peer in the A.B.C.D format.
X:X:X:X::X Enter the IPv6 IP address of peer in the X:X:X:X::X format.
dampening Enter the keyword dampening to view BGP dampening.
events Enter the keyword events to view BGP protocol events.
ipv4 Enter the ipv4 IP address to view the IPV4 route information.
ipv6 Enter the ipv6 IP address to view the IPV6 route information.
keepalives Enter the keyword keepalives to view BGP keepalives.
notications Enter the keyword notifications to view BGP notications.
soft-reconguration Enter the keywords soft-reconfiguration to view only information on
inbound BGP soft reconguration.
updates Enter the keyword updates to view BGP updates.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
To view information on both incoming and outgoing routes, do not include the in and out parameters in the
debugging command. The in and out parameters cancel each other; for example, if you enter the debug
ip bgp in
command and then enter the debug ip bgp out command, you do not see information on
the incoming routes.
Entering a no debug ip bgp command removes all congured debug commands for BGP.
Related Commands
debug ip bgp events — views information about BGP events.
debug ip bgp keepalives — views information about BGP keepalives.
376
Border Gateway Protocol