Users Guide
Version Description
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
In Non-Deterministic mode, paths are compared in the order in which they arrive. This method can lead to
Dell Networking OS choosing dierent best paths from a set of paths, depending on the order in which they
are received from the neighbors because MED may or may not get compared between adjacent paths. In
Deterministic mode (no bgp non-deterministic-med), Dell Networking OS compares MED between
adjacent paths within an AS group because all paths in the AS group are from the same AS.
When you change the path selection from Deterministic to Non-Deterministic, the path selection for the
existing paths remains Deterministic until you enter the clear ip bgp command to clear existing paths.
bgp recursive-bgp-next-hop
Enable next-hop resolution through other routes learned by BGP.
Syntax
bgp recursive-bgp-next-hop
To disable next-hop resolution, use the no bgp recursive-bgp-next-hop command.
Defaults Enabled
Command Modes ROUTER BGP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.2.1.0 Introduced.
Border Gateway Protocol
367