Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

351

352

353

354

355

356

357

358

359

360

Command Modes ROUTER BGP

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.3.1.0 Introduced

Usage Information Conguring this option retains the current best-path. When sessions are then reset, the oldest received path

is chosen as the best-path.

bgp client-to-client reection

Allows you to enable route reection between clients in a cluster.

Syntax

bgp client-to-client reflection

To disable client-to-client reection, use the no bgp client-to-client reflection command.

Defaults Enabled when a route reector is congured.