Users Guide
Number of messages from IFA about port state change: 0
Number of messages communicated b/w Manager and Agent: 6
Dell#
Related Commands
bfd all-neighbors — establishes BFD sessions with all neighbors discovered by the IS-IS protocol or OSPF
protocol out of all interfaces.
vrrp bfd neighbor
Establish a BFD for VRRP session with a neighbor.
Syntax
vrrp bfd neighbor ip-address
To remove the BFD session with the neighbor, use the no vrrp bfd neighbor ip-address
command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format (A.B.C.D).
Defaults none
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the C-Series.
7.5.1.0 Added support for VLAN and port-channel interfaces on the E-Series.
7.4.1.0 Introduced on the E-Series.
Related Commands show bfd neighbors — displays the BFD neighbor information on all interfaces or a specied interface.
Bidirectional Forwarding Detection (BFD)
345