Users Guide

Version Description
8.1.1.0 Introduced on the E-Series ExaScale.
pre-7.7.1.0 Introduced.
Related Commands route-map — enables a route map.
match as-path
To match routes that have a certain AS number in their BGP path, congure a lter.
Syntax
match as-path as-path-name
To delete a match AS path lter, use the no match as-path as-path-name command.
Parameters
as-path-name Enter the name of an established AS-PATH ACL, up to 140 characters.
Defaults Not congured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names
are up to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Related Commands set as-path — adds information to the BGP AS_PATH attribute.
match community
To match routes that have a certain COMMUNITY attribute in their BGP path, congure a lter.
Syntax
match community community-list-name [exact]
254
Access Control Lists (ACL)