Users Guide

Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Increase the name string to accept up to 140 characters. Prior to 7.8.1.0, names
were up to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Related Commands ip prex-list — congures a prex list.
deny
To drop packets meeting the criteria specied, congure a lter.
Syntax
deny ip-prefix [ge min-prefix-length] [le max-prefix-length]
To delete a drop lter, use the no deny ip-prefix command.
Parameters
ip-prex Specify an IP prex in the network/length format. For example, 35.0.0.0/ 8 means
match the rst 8 bits of address 35.0.0.0.
ge min-prex-
length
(OPTIONAL) Enter the keyword ge and then enter the minimum prex length,
which is a number from zero (0) to 32.
le max-prex-length (OPTIONAL) Enter the keyword le and then enter the maximum prex length,
which is a number from zero (0) to 32.
Defaults Not congured.
Command Modes PREFIX-LIST
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
246
Access Control Lists (ACL)