Users Guide

show ip
accounting
access-lists
Field
Description
“order 4” Displays the QoS order of priority for the ACL entry.
Example
Dell#show ip accounting access-list L3-ACL vrf vrf3
!
Standard Ingress IP access list L3-ACL on vrf3
Total cam count 3
seq 5 permit 10.1.2.0/24
seq 10 permit 20.1.2.0/24
seq 15 permit 30.1.2.0/24
Dell#
show ip access-lists
Display all of the IP ACLs congured in the system, whether or not they are applied to an interface, and the count of matches/
mismatches against each ACL entry displayed.
Syntax
show ip access-lists [access-list-name] [interface interface] [in | out]
[vrf vrf-name]
Parameters
access-list-name Enter the name of a congured MAC ACL, up to 140 characters.
interface interface Enter the keyword interface followed by the one of the following keywords and
slot/port or number information:
• For a VLAN interface, enter the keyword vlan followed by the slot/port
number.
•
For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
followed by the slot/port information.
• For a Port Channel interface, enter the keyword port-channel followed by a
number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
in | out Identify whether ACL is applied on the ingress or egress side.
vrf vrf-name Enter the keyword vrf and then the name of the VRF to display the access-lists
that are congured on either the default or non-default VRFs.
Command Modes EXEC Privilege
Command History
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
8.5.1.0 Added support for the 4-port 40G line cards on ExaScale.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
Access Control Lists (ACL)
203