Users Guide

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

9.0.0.0 Introduced on the Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

8.4.1.0 Introduced on the C-Series and S-Series.

Usage Information To disable MAC authentication bypass on a port, enter the no dot1x mac-auth-bypass command.

dot1x max-eap-req

Congure the maximum number of times an extensive authentication protocol (EAP) request is transmitted before the session times

out.

Syntax

dot1x max-eap-req number

To return to the default, use the no dot1x max-eap-req command.

Parameters

number Enter the number of times an EAP request is transmitted before a session time-

out. The range is from 1 to 10. The default is 2.

Defaults 2

Command Modes INTERFACE

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.