Users Guide

show ethernet cfm statistics
Display MEP statistics.
Syntax
show ethernet cfm statistics [domain {name | level} vlan-id vlan-id mpid
mpid]
Parameters
domain Enter the keyword domain to display statistics for a particular domain.
name | level Enter the domain name or level.
vlan-id vlan-id Enter the keyword vlan-id then a VLAN ID.
mpid mpid Enter the keyword mpid then a maintenance point ID.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the S-Series.
Example
Dell# show ethernet cfm statistics
Domain Name: Customer
Domain Level: 7
MA Name: My_MA
MPID: 300
CCMs:
Transmitted: 1503 RcvdSeqErrors: 0
LTRs:
Unexpected Rcvd: 0
LBRs:
Received: 0 Rcvd Out Of Order: 0
Received Bad MSDU: 0
Transmitted: 0
show ethernet cfm port-statistics
Display CFM statistics by port.
Syntax
show ethernet cfm port-statistics [interface type slot/port[]]
Parameters
interface type Enter the keyword interface then the interface type.
170
802.1ag