Users Guide

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
Example
Dell#show ethernet cfm maintenance-points local mip
-----------------------------------------------------
MPID Domain Name Level Type Port CCM-Status
MA Name VLAN Dir MAC
-----------------------------------------------------
0 service1 4 MIP Gi 0/5 Disabled
My_MA 3333 DOWN 00:01:e8:0b:c6:36
0 service1 4 MIP Gi 0/5 Disabled
Your_MA 3333 UP 00:01:e8:0b:c6:36
-----------------------------------------------------
MPID Domain Name Level Type Port CCM-Status
MA Name VLAN Dir MAC
-----------------------------------------------------
0 service1 4 MIP Te 1/5/1 Disabled
My_MA 3333 DOWN 00:01:e8:0b:c6:36
0 service1 4 MIP Te 1/5/1 Disabled
Your_MA 3333 UP 00:01:e8:0b:c6:36
show ethernet cfm maintenance-points remote
Display the MEP Database.
Syntax
show ethernet cfm maintenance-points remote detail [active | domain {level
| name} | expired | waiting]
Parameters
active Enter the keyword active to display only the MEPs in active state.
domain [name |
level]
Enter the keyword domain then the domain name or domain level.
expired Enter the keyword expired to view MEP entries that have expired due to
connectivity failure.
waiting Enter the keyword waiting to display MEP entries waiting for response.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
168
802.1ag