Users Guide

static Enter the keyword static to display details about the static VLT proxy gateway
conguration.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information
The proxy-gateway feature may go operationally down for any of the following reasons:
• LLDP is globally disabled.
• LDP is disabled per port.
• VLT port-channel is down.
• LLDP neighbor is down.
If any of these conditions is true, the proxy-gateway feature could be operationally down. If so, it is shown in
the show command output.
When more than one VLT port-channel terminates on the same ToR, the show VLT proxy-gateway
info lldp command output may show the port-channel ID incorrectly.
Example
Dell#show vlt proxy-gateway
VLT Proxy Gateway Brief
-------------------------
Config Mode: LLDP
Global LLDP Config Status: Enabled
peer-mac-transmit Status: Disabled
Dell#show vlt proxy-gateway info static
Mac Address Exclude Vlan
----------- ------------
00:01:e8:8a:e8:f7 3,7-8
00:01:e8:8b:1c:c0 3,7-8
Dell#show vlt proxy-gateway info lldp
LagId Mac Address Exclude Vlan
----- ----------- ------------
Po 55 00:01:e8:8a:e8:f7 3,7-8 << Macs learnt via port-channel 55
Po 55 00:01:e8:8b:1c:c0 3,7-8
1588
VLT Proxy Gateway