Users Guide

Use this timer when you enable vlt-peer-mac transmit. A typical use example is a square VLT
topology with a single link connecting to the remote peers.
Example
Dell(conf-vlt-domain-proxy-gw-lldp)# peer-timeout 5
vlt-peer-mac transmit
Enables the device to transmit the peer MAC address along with its own MAC address in LLDP TLV packets to the remote VLT
domain.
S3048–ON
Syntax
[no] vlt-peer-mac transmit
Command Modes VLT DOMAIN PROXY GW LLDP
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information This command enables the device to transmit its VLT peer MAC address along with its own MAC address to
the remote VLT domain. By default, a node sends only its own MAC address to the remote VLT domain.
This conguration is applicable only for an LLDP proxy gateway. A typical use example is a square VLT
topology with single link connecting to the remote peers.
Example
Dell(conf-vlt-domain-proxy-gw-lldp)# vlt-peer-mac transmit
show vlt-proxy-gateway
Displays the VLT proxy gateway conguration.
S3048–ON
Syntax
show vlt-proxy-gateway [info] {lldp | static}
Parameters
lldp Enter the keyword lldp to display details about the LLDP VLT proxy gateway
conguration.
VLT Proxy Gateway
1587