Users Guide

Combination: 3, 4, 5-10, 8
Command Modes VLT DOMAIN PROXY GW STATIC
Command History This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version
history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information You can congure the MAC address of a VLT peer in a remote VLT domain to associate with the static VLT
proxy gateway and exclude a VLAN, or a range of VLANs, from proxy routing.
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
Dell(conf-vlt-domain-proxy-gw-static)#remote-mac-address 00:01:e8:06:95:ac
exclude-vlan 3
peer-domain-link port-channel exclude-vlan
Congure the VLT port channel, which is connected to the remote VLT domain, for the proxy gateway or congure the VLANs you
want to exclude from VLT proxy gateway.
S3048–ON
Syntax
[no] peer-domain-link port-channel interface-identifier exclude-vlan vlan-
range
Parameters
port-channel Congure the proxy-gateway interface port-channel.
interface-identier Enter the interface type.
vlan-range
Enter the VLAN IDs that you want to exclude from the proxy gateway. The value
can be a single VLAN ID, comma-separated VLAN IDs, a range of VLAN IDs, or a
combination. For example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Command Modes VLT DOMAIN PROXY GW LLDP
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
VLT Proxy Gateway
1585