Users Guide

62
VLT Proxy Gateway
The Virtual link trucking (VLT) proxy gateway feature allows a VLT domain to locally terminate and route L3 packets that are destined
to a Layer 3 (L3) end point in another VLT domain. Enable the VLT proxy gateway using the link layer discover protocol (LLDP)
method or the static conguration. For more information, refer to Dell Networking OS Command Line Reference Guide.
proxy-gateway lldp
Enables the proxy-gateway feature using the LLDP protocol.
S3048–ON
Syntax
[no] proxy-gateway lldp
Command Modes VLT DOMAIN
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information The conguration is cached and sent to LLDP only in one of the following conditions:
1. The port-channel connecting the two VLT domains, across the DC, is a VLT LAG.
2. The protocol lldp command is globally enabled.
3. The proxy-gateway LLDP conguration is applied.
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway lldp
VLT Proxy Gateway
1583