Users Guide

Usage Information
If you do not specify the maximum route limit for a VRF, the VRF has unlimited space that extends to the
maximum number of entries allowed for the system. This command does not apply to default and
management VRFs.
show ip vrf
Displays information corresponding to the VRFs that you congure in the system.
Syntax
show ip [vrf vrf-name]
Parameters
vrf vrf-name Enter the keyword vrf then the name of the VRF to display information
corresponding to that VRF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.4.(0.0) Introduced on the S-Series and Z9000.
Example
show ip vrf
VRF-Name VRF-ID Interfaces
fault 0 Gi 1/1-13,18-47,
Te 1/49,50,51,52,
Ma 1/1,
Ma 2/1,
Ma 3/1,
Ma 4/1,
Ma 5/1,
Ma 6/1,
Nu 0,
Vl 1
test1 1 Gi 1/14,16-17
test2 2 Gi 1/15
management 64
Dell#show ip vrf test1
VRF-Name VRF-ID Interfaces
Virtual Routing and Forwarding (VRF)
1581