Users Guide

61
Virtual Routing and Forwarding (VRF)
Virtual Routing and Forwarding (VRF) allows multiple instances of a routing table to co-exist on the same router at the same time.
ip vrf
Create or delete a customer VRF.
Syntax
ip vrf {vrf-name | management} [vrf_id]
To delete a customer VRF, use the no ip vrf {vrf-name | management} [vrf_id] command.
Parameters
vrf-name Enter the name of the VRF that you create.
management Enter the keyword management to create the management VRF.
vrf_id (Optional) Enter the ID of the VRF that you create.
Defaults Available by default for management VRF. For creating other customer VRFs, enable the feature vrf
option in Conguration mode.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON and Z9500.
9.4(0.0) Introduced on the S4810 and S4820T.
Usage Information
You cannot use the keyword default as a VRF name as this name indicates a special VRF.
To create a management VRF, use the keyword management.
The VRF ID is optional.
Virtual Routing and Forwarding (VRF)
1571