Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1561

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.3.1.0 Introduced on the C-Series and S-Series.

Usage Information Enable DEI before using this command.

member

Assign a stackable VLAN access or trunk port to a VLAN. The VLAN must contain the vlan-stack compatible command in

its conguration.

Syntax

member interface

To remove an interface from a Stackable VLAN, use the no member interface command.

Parameters

interface Enter the following keywords and slot/port or number information:

• For a Port Channel interface, enter the keywords port-channel then a

number.

• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet

then the slot/port information.

• For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

Defaults Not congured.

Command Modes CONF-IF-VLAN

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.