Users Guide

Defaults encryption-type for the password is 0.
Command Modes SUPPORTASSIST SERVER
Command History
Version Description
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage Information The passwords are stored encrypted in the running conguration.
enable
Enable communication with the SupportAssist server.
Syntax
enable
To disable communication to a specic SupportAssist server, use the no enable command.
Command Modes SUPPORTASSIST SERVER
Command History
Version Description
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Related Commands server — congures the name of the remote SupportAssist server.
url
Congure the URL to reach the SupportAssist remote server.
Syntax
url uniform-resource-locator
To delete the URL for the server, use the no url command.
Parameters
uniform-resource-
locator
Enter a text string for the URL using one of the following formats:
• http://[username:password@]<hostip>:<portNum>/<lepath>
• https://[username:password@]<hostip>:<portNum>/<lepath>
NOTE: The host IP for the server may be specied as an IPv4 address,
an IPv6 address or as a DNS hostname. If using the DNS hostname, the
DNS resolver will need to be congured and enabled.
Command Modes SUPPORTASSIST SERVER
Command History
Version Description
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage Information The URL should be formatted to follow the ISO format.
SupportAssist
1521