Users Guide

Usage Information
The server-name is used as a reference only and is not required to be used as part of a URL denition.
There is a reserved name of default for the default server at stor.g3.ph.dell.com. You can customize the
defaults for this server by entering the server default command and use the custom commands.
You can congure one additional server.
SupportAssist Activity Commands
Dell Networking OS supports the following SupportAssist Activity mode commands.
action-manifest get
Copy an action-manifest le for an activity to the system.
Syntax
action-manifest get tftp | ftp | flash <file-specification> <local-file-
name>
Parameters
le-specication
Enter the full le specication for the action-manifest le. For example:
• tftp://hostip/lepath
• ftp://userid:password@hostip/lepath
• scp://userid:password@hostip/lepath
local-le-name Enter the name of the local action-manifest le, up to 32 characters long. Allowable
characters are: a to z, A to Z, 0 to 9, -, _, and space.
Command Modes SUPPORTASSIST ACTIVITY
Command History
Version Description
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage Information The remote le specication includes the protocol that is used to copy the le from the remote system.
Related Commands
action-manifest install — congures the action-manifest to use for a specic activity.
action-manifest show — views the list of action-manifest for a specic activity.
action-manifest remove — removes the action-manifest le for an activity.
action-manifest install
Congure the action-manifest to use for a specic activity.
Syntax
action-manifest install {default | <local-file-name>}
To revert to the default action-manifest le, use the action-manifest install default command.
1514
SupportAssist