Users Guide

Parameters
packets_per_secon
d in
Enter the packets per second of broadcast trac allowed into the network. The
range is from 0 to 33554368.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 E-Series Only: Added the percentage decimal value option.
6.5.1.0 Introduced on the E-Series.
Usage Information Unknown Unicast Storm-Control is valid for Layer 2 and Layer 2/Layer 3 interfaces.
storm-control unknown-unicast (Interface)
Congure percentage of unknown-unicast trac allowed on an interface (ingress only).
Syntax
storm-control unknown-unicast [percentage decimal_value in] | [wred-profile
name]] [packets_per_second in]
To disable unknown-unicast storm control on the interface, use the no storm-control unknown-
unicast [percentage decimal_value in] | [wred-profile name]]
[packets_per_second in] command.
Parameters
percentage
decimal_value [in |
out]
E-Series Only: Enter the percentage of broadcast trac allowed in or out of the
network. Optionally, you can designate a decimal value percentage, for example,
55.5%.
The percentage is from 0 to 100:
• 0% blocks all related trac.
Storm Control
1493