Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1481

Version Description

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.7.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

Related Commands

• reload – reboots Dell Networking OS.

stack-unit provision

Precongure a logical stacking ID of a switch that joins the stack. This is an optional command that is executed on the management

unit.

Syntax

stack-unit [stack-number] provision {S4810|S4820T|S6000|Z9000}

Parameters

stack-unit Enter a stack member identier of the switch that you want to add to the stack.

S4810|S4820T|

S6000|Z9000

Enter the model identier of the switch to be added as a stack member. This

identier is also referred to as the provision type.

Defaults When this value is not set, a switch joining the stack is given the next available sequential stack member

identier.

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.