Users Guide

Message ID Trap Type Trap Option
CHM_ALARM_CUTOFF ENVMON NONE
CHM_SFM_UP ENVMON NONE
CHM_SFM_DOWN ENVMON NONE
CHM_RPM_UP ENVMON NONE
%RAM-6-RPM_STATE: RPM1 is in
Active State
%RAM-6-RPM_STATE: RPM0 is in
Standby State
CHM_RPM_DOWN ENVMON NONE
%CHMGR-2-RPM_DOWN: RPM 0 down
- hard reset
%CHMGR-2-RPM_DOWN: RPM 0 down
- card removed
CHM_RPM_PRIMARY ENVMON NONE
%RAM-5-COLD_FAILOVER: RPM
Failover Completed
%RAM-5-HOT_FAILOVER: RPM
Failover Completed
%RAM-5-FAST_FAILOVER: RPM
Failover Completed
CHM_SFM_ADD ENVMON NONE
%TSM-5-SFM_DISCOVERY: Found
SFM 1
CHM_SFM_REMOVE ENVMON NONE
%TSM-5-SFM_REMOVE: Removed
SFM 1
CHM_MAJ_SFM_DOWN ENVMON NONE
%CHMGR-0-MAJOR_SFM: Major
alarm: Switch fabric down
CHM_MAJ_SFM_DOWN_CLR ENVMON NONE
%CHMGR-5-MAJOR_SFM_CLR: Major
alarm cleared: Switch fabric
up
CHM_MIN_SFM_DOWN ENVMON NONE
%CHMGR-2-MINOR_SFM: MInor
alarm: No working standby SFM
CHM_MIN_SFM_DOWN_CLR ENVMON NONE
%CHMGR-5-MINOR_SFM_CLR: Minor
alarm cleared: Working
standby SFM present
CHM_PWRSRC_DOWN ENVMON SUPPLY
1470
SNMP Traps