Users Guide

Unit Type : Management Unit
Status : Card Problem - Software Failure
Next Boot : online
Required Type : S6000-ON - 32-port TE/FG (SI-ON)
Current Type : S6000-ON - 32-port TE/FG (SI-ON)
Master priority : 0
Hardware Rev : 3.0
Num Ports : 128
Up Time : 3 day, 22 hr, 33 min
Dell Networking OS Version : 9-7(0-288)
Jumbo Capable : yes
POE Capable : no
FIPS Mode : disabled
Boot Flash : Present
Boot Selector : 3.20.0.0
Memory Size : 3203911680 bytes
Temperature : 0C
Voltage : ok
Serial Number : NA
Part Number : <PART NUMB Rev R>
Vendor Id : NA
Date Code : NA
Country Code : NA
Piece Part ID : <SER:)0
PPID Revision : R>
Service Tag : N/A
Expr Svc Code : 0
Auto Reboot : disabled
Burned In MAC : 00:00:00:00:00:00
No Of MACs : 3
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm)
---------------------------------------
1 1 up AC up 18528
1 2 absent absent 0
-- Fan Status --
Unit Bay TrayStatus Fan1 Speed Fan2 Speed
---------------------------------------
1 1 up up 19275 up 19275
1 2 absent
1 3 up up 19275 up 18904
Speed in RPM
Related Commands
• show version – displays the Dell Networking OS version.
show tech-support
Display a collection of data from other show commands, necessary for Dell Networking technical support to perform
troubleshooting.
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
stack-unit (OPTIONAL) Enter the keywords stack-unit to view CPU memory usage for
the stack member designated by unit-id. The unit ID range is from 1to 6.
Control and Monitoring
147