Users Guide

Version Description
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage Information The following Example displays a group named ngroup. The ngroup has a security model of version 3 (v3)
with authentication (auth), the read and notify name is nview with no write view name specied, and nally
the row status is active.
Example
Dell#show snmp group
groupname: v1v2creadg security model: v1
readview : v1v2cdefault writeview: no write view specified
notifyview: v1v2cdefault context: no context specified
row status: active
Dell#
Related Commands snmp-server group — congures an SNMP server group.
show snmp user
Display the information congured on each SNMP user name.
Syntax
show snmp user
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Example
Dell#show snmp user
User name: v1v2creadu
Engine ID: 0000178B02000001E80214A8
Simple Network Management Protocol (SNMP) and Syslog
1427