Users Guide

ipv6-address prex-
length
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prex length
in the /x format. The range is from /0 to /128.
NOTE: The :: notation species successive hexadecimal elds of zeros.
-c encryption cipher Enable the “FIPS mode enable", this mode will support only v2 client.
"no ps mode enable"(disable) will support v1 & v2 client. This comment is
applicable for both ciphers & HMAC algorithms:
• 3des-cbc: Force ssh to use 3des-cbc encryption cipher.
•
aes128-cbc : Force ssh to use aes128-cbc encryption cipher
• aes192-cbc : Force ssh to use aes192-cbc encryption cipher
• aes256-cbc : Force ssh to use aes256-cbc encryption cipher
• aes128-ctr : Force ssh to use aes128-ctr encryption cipher
• aes192-ctr : Force ssh to use aes192-ctr encryption cipher
• aes256-ctr : Force ssh to use aes256-ctr encryption cipher
-l username (OPTIONAL) Enter the keyword -l then the user name used in this SSH session.
The default is the user name of the user associated with the terminal.
-m HMAC
algorithm
Enter one of the following HMAC algorithms to use. (For v2 clients only):
"no ps mode enable"(disable) will support v1 & v2 client.
• hmac-md5: Force ssh to use hmac-md5 HMAC algorithm.
• hmac-md5-96: Force ssh to use hmac-md5-96 HMAC algorithm.
• hmac-sha1: Force ssh to use hmac-sha1 HMAC algorithm.
• hmac-sha1-96 : Force ssh to use hmac-sha1-96 HMAC algorithm.
• hmac-sha2-256 : Force ssh to use hmac-sha2-256 HMAC algorithm.
• hmac-sha2-256-96: Force ssh to use hmac-sha2-256-96 HMAC algorithm.
-p port-number (OPTIONAL) Enter the keyword -p then the port number. The range is from 1 to
65535. The default is 22.
-v {1 | 2} (OPTIONAL) Enter the keyword -v then the SSH version 1 or 2. The default is the
version from the protocol negotiation.
Defaults As shown in the Parameters section.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
Security
1391