Users Guide

0x00000253 100 10 10000 0.20% 0.02% 0.02% 0 otm
0x00000206 140 14 10000 0.20% 0.02% 0.03% 0 tnlmgr
0x00000012 1290 129 10000 0.00% 0.10% 0.12% 0 mount_mfs
0x0000024d 400 40 10000 0.00% 0.08% 0.14% 0 xstp
Related Commands
show hardware layer2 acl — displays Layer 2 ACL data for the selected stack member and stack member
port-pipe.
show hardware layer3 — displays Layer 3 ACL or QoS data for the selected stack member and stack
member port-pipe.
show hardware stack-unit — displays the data plane or management plane input and output statistics of the
designated component of the designated stack member.
show hardware system-ow — displays Layer 3 ACL or QoS data for the selected stack member and stack
member port-pipe.
show interfaces stack-unit — displays information on all interfaces on a specic S-Series stack member.
show processes memory (S-Series) — displays CPU usage information based on processes running in an S-
Series.
show processes ipc ow-control
Display the single window protocol queue (SWPQ) statistics.
Syntax
show processes ipc flow-control [cp]
Parameters
cp (OPTIONAL) Enter the keyword cp to view the control processor’s SWPQ
statistics.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
138
Control and Monitoring