Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1371

To disable password-authentication, use the no ip ssh password-authentication enable

command.

Parameters

enable Enter the keyword enable to enable password-authentication for the SSH server.

Defaults Enabled

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

pre-6.1.1.0 Introduced on the E-Series.

Usage Information With password authentication enabled, you can authenticate using the local, RADIUS, or TACACS+

password fallback order as congured.

ip ssh pub-key-le

Specify the le used for host-based authentication.

Syntax

ip ssh pub-key-file {WORD}