Users Guide

Version Description
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced this version of the command for the S-Series.
Usage Information The output for show memory displays the memory usage of LP part (sysdlp) of the system. The sysdlp is
an aggregate task that handles all the tasks running on the S-Series’ CPU.
Example
Dell#show memory stack-unit 1
Statistics On Unit 1 Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
268435456 4010354 264425102 264375410 264425102
Example (S4820T)
Dell#show memory stack 0
Statistics On Unit 0 Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
2147483648 4322398 2143161250 2142548382 2143161250
Dell#
show processes cpu
Display CPU usage information based on processes running.
Syntax
show processes cpu [management-unit 1-99 [details] | stack-unit id |
summary | [stack-unit id]]
Parameters
management-unit
1-99 [details]
(OPTIONAL) Display processes running in the control processor. The 1-99 variable
sets the number of tasks to display in order of the highest CPU usage in the past
ve (5) seconds. Add the keyword details to display all running processes
(except sysdlp). Refer to Example (management-unit).
stack-unit id (OPTIONAL) Enter the keyword stack-unit then the stack member ID.
As an option of the show processes cpu command, this option displays CPU
usage for the designated stack member. Or, as an option of the
command, this
option limits the output of memory statistics to the designated stack member. .
The unit ID range is from 1 to 6.
Refer to Example (stack-unit).
summary (OPTIONAL) Enter the keywordsummary to view CPU utilization of processes
related to stack-unit processing.
Command Modes
• EXEC
• EXEC Privilege
Control and Monitoring
135