Users Guide

Authentication and Password Commands
To manage access to the system, use the following the commands.
aaa authentication enable
Congure AAA Authentication method lists for user access to EXEC privilege mode (the “Enable” access).
Syntax
aaa authentication enable {default | method-list-name} method [... method2]
To return to the default setting, use the no aaa authentication enable {default | method-
list-name} method [... method2] command.
Parameters
default Enter the keyword default then the authentication methods to use as the
default sequence of methods for the Enable login. The default is default
enable
.
method-list-name Enter a text string (up to 16 characters long) to name the list of enabled
authentication methods activated at login.
method Enter one of the following methods:
• enable: use the password the enable password command denes in
CONFIGURATION mode.
• line: use the password the password command denes in LINE mode.
•
none: no authentication.
• radius: use the RADIUS servers congured with the radius-server
host command.
• tacacs+: use the TACACS+ server(s) congured with the tacacs-server
host command.
... method2 (OPTIONAL) In the event of a “no response” from the rst method, Dell
Networking OS applies the next congured method.
Defaults Use the enable password.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
1326
Security