Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1271

route-map map-

name

(OPTIONAL) Enter the keywords route-map then the name of a congured

route map.

Defaults Not congured.

Command Modes ROUTER RIP

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series.

7.6.1.0 Introduced on the C-Series.

pre- 6.2.1.1 Introduced on the E-Series.

router rip

To congure and enable RIP, enter ROUTER RIP mode.

S3048–ON

Syntax

router rip

To disable RIP, use the no router rip command.

Defaults Disabled.

Command Modes CONFIGURATION