Users Guide

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Added fallback to the E-Series.
8.2.1.0 Added dot1p to the C-Series and S-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Added dot1p and IPv6 DSCP .
6.1.1.1 Introduced on the E-Series.
Usage Information
When you congure trust, matched bytes/packets counters are not incremented in the show qos
statistics command.
Dynamic mapping honors packets marked according to the standard denitions of DSCP. The following lists
the default mapping.
Table 3. Default Mapping
DSCP/CP hex
Range (XXX)
DSCP
Denition
Traditional IP
Precedence
S6000 Internal
Queue ID
S-Series
Internal Queue
ID
DSCP/CP
Decimal
111XXX Network
Control
7 3 48–63
110XXX Internetwork
Control
6 3 48–63
101XXX EF (Expedited
Forwarding)
CRITIC/ECP 5 2 32–47
100XXX AF4 (Assured
Forwarding)
Flash Override 4 2 32–47
011XXX AF3 Flash 3 1 16–31
010XXX AF2 Immediate 2 1 16–31
001XXX AF1 Priority 1 0 0–15
000XXX BE (Best
Eort)
Best Eort 0 0 0–15
1248
Quality of Service (QoS)