Users Guide

Version Description
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 E-Series only: Added trust IPv6 diffserv .
6.2.1.1 Introduced on the E-Series.
Example (IPv4)
Dell#show qos policy-map detail gigabitethernet 1/1
Interface GigabitEthernet 4/1
Policy-map-input policy
Trust dffserv
Queue# Class-map-name Qos-policy-name
0 - q0
1 CM1 q1
2 CM2 q2
3 CM3 q3
Dell#
Example (IPv6)
Example (Summary
IPv4)
Dell#sho qos policy-map summary
Interface policy-map-input policy-map-output
Gi 4/1 PM1 -
Gi 4/2 PM2 PMOut
Dell#
show qos policy-map-input
View the input QoS policy map details.
S3048–ON
Syntax
show qos policy-map-input [policy-map-name] [class class-map-name] [qos-
policy-input qos-policy-name]
Parameters
policy-map-name Enter the policy map name.
class class-map-
name
Enter the keyword class then the class map name.
qos-policy-input
qos-policy-name
Enter the keyword qos-policy-input then the QoS policy name.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1238
Quality of Service (QoS)