Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1231

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.1.1.1 Introduced on the E-Series.

Example

Dell#show qos class-map

Class-map match-any CM

Match ip access-group ACL

Related Commands class-map — identies the class map.

show qos dot1p-queue-mapping

Displays the dot1p priority to queue mapping on the switch.

Syntax

show qos dot1p-queue-mapping

Defaults

• dot1p Priority: 0 1 2 3 4 5 6 7

• Queue: 1 0 0 1 2 2 3 3

Command Modes EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.