Users Guide

To remove the output policy map from the interface, use the no service-policy output policy-
map-name command.
Parameters
policy-map-name Enter the name for the policy map in character format (32 characters maximum).
You can identify an existing policy map or name one that does not yet exist.
Defaults none
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the C-Series and S-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information A single policy-map can be attached to one or more interfaces to specify the service-policy for those
interfaces. A policy map attached to an interface can be modied.
Related Commands
policy-map-output — creates an output policy map.
service-queue
Assign a class map and QoS policy to dierent queues.
S3048–ON
Syntax
service-queue queue-id [class-map class-map-name] [qos-policy qos-policy-
name]
To remove the queue assignment, use the no service-queue queue-id [class-map class-
map-name] [qos-policy qos-policy-name] command.
Parameters
queue-id Enter the value used to identify a queue. The range is from 0 to 7.
class-map class-
map-name
(OPTIONAL) Enter the keyword class-map then the class map name assigned to
the queue in character format (32 character maximum).
Quality of Service (QoS)
1233