Users Guide

Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Policy name character limit increased from 16 to 32.
7.6.1.0 Introduced on the C-Series and S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information
Use this command to specify the name of the input QoS policy. Once input policy is specied, rate-police
can be dened. This command enables the qos-policy-input conguration mode— (conf-qos-policy-in).
When changing a Service-Queue conguration in a QoS policy map, all QoS rules are deleted and re-added
automatically to ensure that the order of the rules is maintained. As a result, the Matched Packets value
shown in the show qos statistics command is reset.
If you create create a QoS input policy to be used for CoPP, you must enter the keyword cpu-qos .
Related Commands rate police — incoming trac policing function.
qos-policy-output
Create a QoS output policy.
S3048–ON
Syntax
qos-policy-output qos-policy-name
To remove an existing output QoS policy, use the no qos-policy-output qos-policy-name
command.
Parameters
qos-policy-name Enter your output QoS policy name in character format (32 characters maximum).
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
1226
Quality of Service (QoS)