Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1221

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Introduced.

Usage Information To access this command, enter the class-map command. You can match against only one VLAN ID.

Related Commands class-map — identies the class map.

policy-aggregate

Allow an aggregate method of conguring per-port QoS via policy maps. An aggregate QoS policy is part of the policy map (output)

applied on an interface.

S3048–ON

Syntax

policy-aggregate qos-policy-name

To remove a policy aggregate conguration, use the no policy-aggregate qos-policy-name

command.

Parameters

qos-policy-name Enter the name of the policy map in character format (32 characters maximum).

Defaults none

Command Modes CONFIGURATION (policy-map-input and policy-map-output)