Users Guide
Version Description
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage Information To access this command, enter the class-map command. After the class map is identied, you can
congure the match criteria.
Use this command to match an IP class-map against a single VRF ID .
Related Commands class-map — identies the class map.
match mac access-group
Congure a match criterion for a class map, based on the contents of the designated MAC ACL.
S3048–ON
Syntax
match mac access-group {mac-acl-name}
Parameters
mac-acl-name Enter a MAC ACL name. Its contents is used as the match criteria in the class map.
Defaults none
Command Modes CLASS-MAP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Available on the C-Series and S-Series.
7.5.1.0 Added support for the DSCP Marking option.
7.4.1.0 Introduced on the E-Series.
Usage Information To access this command, enter the class-map command. After the class map is identied, you can
congure the match criteria.
Related Commands class-map — identies the class map.
1220
Quality of Service (QoS)