Users Guide

Version Description
7.5.1.0 Introduced on the C-Series. Added support for the DSCP Marking option.
6.1.1.1 Introduced on the E-Series.
Usage Information To access this command, enter the class-map command. After the class map is identied, you can
congure the match criteria. For class-map match-any, a maximum of ve ACL match criteria are allowed.
For class-map match-all, only one ACL match criteria is allowed.
Related Commands
class-map — identies the class map.
match ip dscp
Use a dierentiated services code point (DSCP) value as a match criteria.
S3048–ON
Syntax
match {ip | ipv6 | ip-any} dscp dscp-list [set-ip-dscp value]
To remove a DSCP value as a match criteria, use the no match {ip | ipv6 | ip-any} dscp
dscp-list [[multicast] set-ip-dscp value] command.
Parameters
ip Enter the keyword ip to support IPv4 trac.
ipv6 Enter the keyword ipv6 to support IPv6 trac.
ip-any Enter the keyword ip-any to support IPv4 and IPv6 trac.
dscp-list Enter the IP DSCP values that is to be the match criteria. Separate values by
commas — no spaces ( 1,2,3 ) or indicate a list of values separated by a hyphen
(1-3). The range is from 0 to 63.
set-ip-dscp value (OPTIONAL) Enter the keywords set-ip-dscp then the IP DSCP value. The
matched trac is marked with the DSCP value. The range is from 0 to 63.
Defaults none
Command Modes CLASS-MAP CONFIGURATION (cong-class-map)
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Added the ipv6 and ip-any options on the Z9000, S6000, S4820T, S4810, MXL.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
1216
Quality of Service (QoS)