Users Guide

qos-policy-output — creates an output QoS-policy on the router.
wred-prole — creates a WRED prole.
match ip access-group
Congure match criteria for a class map, based on the access control list (ACL).
NOTE: IPv6 class-maps and IP-any class-maps do not match. This condition is true for IPv6 and IP-any class-maps on
both ACLs as well as VLANs.
S3048–ON
Syntax
match ip access-group access-group-name [set-ip-dscp value | set-color
value]
To remove ACL match criteria from a class map, use the no match ip access-group access-
group-name [set-ip-dscp value | set-color value] command.
Parameters
access-group-name Enter the ACL name whose contents are used as the match criteria in determining
if packets belong to the class the class-map species.
set-ip-dscp value (OPTIONAL) Enter the keywords set-ip-dscp then the IP DSCP value. The
matched trac is marked with the DSCP value. The range is from 0 to 63.
set-color value (Optional) Enter the keyword set-color followed by a color value. Trac that fullls
the match criteria is marked with the color value that you specify. The default value
is Yellow.
Defaults none
Command Modes CLASS-MAP CONFIGURATION (cong-class-map)
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Added the DSCP Marking option support on the S-Series.
7.6.1.0 Introduced on the S-Series.
Quality of Service (QoS)
1215