Users Guide

S-Series
On one interface, you can congure the rate police command for a VLAN or you can congure the
rate police command for an interface.
rate shape
Shape the trac output on the selected interface.
S3048–ON
Syntax
rate shape [kbps] rate [burst-KB]
Parameters
kbps Enter the keyword kbps to specify the rate limit in Kilobits per second (Kbps). On
S-Series, make the value a multiple of 64. The range is from 0 to 40000000. The
default granularity is Megabits per second (Mbps).
rate The range is from 10 to 40000.
burst-KB (OPTIONAL) Enter the burst size in KB. The range is from 0 to 10000. The default
is 50.
Defaults Granularity for rate is Mbps unless you use the kbps option.
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added the kbps option on the C-Series, E-Series, and S-Series.
7.6.1.0 Introduced on the S-Series and C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information
If trac is shaped between 64 and 1000 Kbs, for some values, the shaped rate is much less than the value
congured.
On 40-port 10G stack-unit if the trac is shaped between 64 and 1000 Kbs, for some values, the shaped
rate is much less than the value congured.
Quality of Service (QoS)
1207