Users Guide
Only ports (and port channels) congured as promiscuous, host, or PVLAN trunk ports (as previously
described) can be added to the PVLAN. No other regular ports can be added to the PVLAN.
After using this command to congure a VLAN as a primary VLAN, use the private-vlan mapping
secondary-vlan command to map secondary VLANs to this VLAN.
Related Commands
private-vlan mapping secondary-vlan — maps secondary VLANs to the selected primary VLAN.
switchport mode private-vlan — sets PVLAN mode of the selected port.
private-vlan mapping secondary-vlan
Map secondary VLANs to the selected primary VLAN.
S3048
Syntax
[no] private-vlan mapping secondary-vlan vlan-list
To remove specic secondary VLANs from the conguration, use the no private-vlan mapping
secondary-vlan vlan-list command syntax.
Parameters
vlan-list Enter the list of secondary VLANs to associate with the selected primary VLAN.
The list can be in comma-delimited or hyphenated-range format, following the
convention for the range input.
Defaults none
Command Modes INTERFACE VLAN
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage Information The list of secondary VLANs can be:
Private VLAN (PVLAN)
1185