Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1151

NOTE: Applies to specic VRF if input is provided, else applies to Default

VRF.

innity (OPTIONAL) Enter the keyword infinity to never switch to the source-tree.

Defaults Not congured.

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.5(0.1) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series ExaScale.

Usage Information This command is applicable to last hop routers on the shared tree towards the rendezvous point (RP).

no ip pim snooping dr-ood

Disable the ooding of multicast packets to the PIM designated router.

Syntax

no ip pim snooping dr-flood

To re-enable the ooding of multicast packets to the PIM designated router, use the ip pim snooping

dr-flood command.

Defaults Enabled.