Users Guide

destination-port-
range
Enter the keywords destination-port-range then the range of the start
port to end port to be matched in the ACL rule in the ICAP rule.
Defaults none
Command Modes REDIRECT-LIST
Command History
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for the track-id on the S4810, S4820T, S6000, S6000-ON, and
Z9000.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
show cam pbr
Display the PBR CAM content.
Syntax
show cam pbr {[interface interface] | stack—unit slot-number port-set
number]} [summary]
Parameters
interface interface Enter the keyword interface then the name of the interface.
stack–unit number Enter the keyword stack-unit then the slot number.
port-set number Enter the keywords port-set then the port-pipe number.
summary Enter the keyword summary to view only the total number of CAM entries.
Defaults none
Command Modes EXEC
Command History
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information The show cam pbr command displays the PBR CAM content.
Example
Dell#show cam pbr stack-unit 1 port-set 0
TCP Flag:Bit 5 - URG, Bit 4 - ACK, Bit 3 - PSH, Bit 2 - RST, Bit 1 - SYN,
Bit 0 - FIN
Policy-based Routing (PBR)
1141