Users Guide

show crypto ipsec sa ipv6 Command Fields
Field Description
Interface IPv6 interface
Link local address IPv6 address of interface
IPSecv6 policy name Name of the IPsec security policy applied to the interface.
inbound/outbound
ah
Authentication policy applied to inbound or outbound trac.
inbound/outbound
esp
Encryption policy applied to inbound or outbound trac.
spi Security policy index number used to identify the policy.
transform Security algorithm that is used to provide authentication, integrity, and condentiality.
in use settings Transform that the SA uses (only transport mode is supported).
replay detection
support
Y: An SA has enabled the replay detection feature.
N: The replay detection feature is not enabled.
STATUS ACTIVE: The authentication or encryption policy is enabled on the interface.
show ipv6 ospf database
Display information in the OSPFv3 database, including link-state advertisements (LSAs).
Syntax
show ipv6 ospf [process-number] [vrf vrf-name] database [database-summary |
grace-lsa]
Parameters
process-number Enter the OSPF process number.
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the VRF to display
neighbors corresponding to that VRF.
NOTE: If you do not specify this option, neighbors corresponding to the
default VRF are displayed.
database-summary
(OPTIONAL) Enter the keywords database-summary to view a summary of
database LSA information.
grace-lsa
(OPTIONAL): Enter the keywords grace-lsa to display the Type-11 Grace LSAs
sent and received on an OSPFv3 router.
Defaults none
Command Modes
EXEC
EXEC Privilege
1128
Open Shortest Path First (OSPFv2 and OSPFv3)