Users Guide

metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then one of the following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into
OSPF. The range is from 0 to 4294967295.
Defaults Not congured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
router-id
To congure a xed router ID, use this command.
S3048–ON
Syntax
router-id ip-address
To remove the xed router ID, use the no router-id ip-address command.
Parameters
ip-address Enter the router ID in the IP address format.
Defaults none.
Command Modes ROUTER OSPF
Open Shortest Path First (OSPFv2 and OSPFv3)
1065