Users Guide

• May update ABR status.
On conguring suppression using the passive-interface command, the state of the OSPF neighbor does not
change to INIT; instead, the state of the OSPF neighbor changes to DOWN after the dead-timer expires.
redistribute
Redistribute information from another routing protocol throughout the OSPF process.
S3048–ON
Syntax
redistribute {connected | isis | ospf | rip | static} [metric metric-value
| metric-type type-value] [route-map map-name] [tag tag-value]
To disable redistribution, use the no redistribute {connected | isis | rip | static}
command.
Parameters
connected Enter the keyword connected to specify that information from active routes on
interfaces is redistributed.
isis Enter the keyword isis to specify that ISO IS-IS information is redistributed.
ospf Enter the keyword ospf to specify that information corresponding to OSPF is
redistributes.
rip Enter the keyword rip to specify that RIP routing information is redistributed.
static Enter the keyword static to specify that information from static routes is
redistributed.
metric metric-value (OPTIONAL) Enter the keyword metric then a number. The range is from 0
(zero) to 16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then one of the following:
• 1 = OSPF External type 1
• 2 = OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag then a number. The range is from 0 to
4294967295.
Defaults Not congured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
1062
Open Shortest Path First (OSPFv2 and OSPFv3)