Users Guide

distribute-list out
To restrict certain routes destined for the local routing table after the SPF calculation, apply a lter.
S3048–ON
Syntax
distribute-list prefix-list-name out [bgp | connected | isis | rip |
static]
To remove a lter, use the no distribute-list prefix-list-name out [bgp | connected
| isis | rip | static] command.
Parameters
prex-list-name Enter the name of a congured prex list.
bgp (OPTIONAL) Enter the keyword bgp to specify that BGP routes are distributed.
NOTE: BGP and ISIS routes are not available on the C-Series. BGP, ISIS,
and RIP routes are not available on the S-Series.
connected (OPTIONAL) Enter the keyword connected to specify that connected routes are
distributed.
isis (OPTIONAL) Enter the keyword isis to specify that IS-IS routes are distributed.
NOTE: BGP and ISIS routes are not available on the C-Series. BGP, ISIS,
and RIP routes are not available on the S-Series.
rip (OPTIONAL) Enter the keyword rip to specify that RIP routes are distributed.
NOTE: BGP and ISIS routes are not available on the C-Series. BGP, ISIS,
and RIP routes are not available on the S-Series.
static (OPTIONAL) Enter the keyword static to specify that only manually congured
routes are distributed.
Defaults Not congured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Open Shortest Path First (OSPFv2 and OSPFv3)
1043