Users Guide

distribute-list in
Apply a lter to incoming routing updates from OSPF to the routing table.
S3048–ON
Syntax
distribute-list prefix-list-name in [interface]
To delete a lter, use the no distribute-list prefix-list-name in [interface] command.
Parameters
prex-list-name Enter the name of a congured prex list.
interface (OPTIONAL) Enter one of the following keywords and slot/port or number
information:
• For Port Channel groups, enter the keywords port-channel then a number.
For the C-Series, S-Series, and Z9000, the range is from 1 to 128.For Z9500,
the range is from 1 to 512.
• For a SONET interface, enter the keyword sonet then the slot/port
information.
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a VLAN, enter the keyword vlan then a number from 1 to 4094.
Defaults Not congured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
1042
Open Shortest Path First (OSPFv2 and OSPFv3)