Users Guide

Example
Dell#show track ipv6 route
Track 2
IPv6 route 2040::/64 metric threshold
Metric threshold is Up (STATIC/0/0)
5 changes, last change 00:02:30
Metric threshold down 255 up 254
First-hop interface is GigabitEthernet 1/2
Tracked by:
VRRP GigabitEthernet 2/4 IPv6 VRID 1
Track 3
IPv6 route 2050::/64 reachability
Reachability is Up (STATIC)
5 changes, last change 00:02:30
First-hop interface is GigabitEthernet 1/2
Tracked by:
VRRP GigabitEthernet 2/4 IPv6 VRID 1
Usage Command The following describes the show track ipv6 route brief command shown in the Example below.
Ouput Description
ResID Number of the tracked object.
Resource Type of tracked object.
Parameter Detailed description of the tracked object.
State Up or Down state of the tracked object.
Last Change Time since the last change in the state of the tracked object.
Example (Brief)
Dell#show track ipv6 route brief
ResId Resource Parameter State LastChange
2 IPv6 route metric threshold 2040::/64 Up 00:02:36
3 IPv6 route reachability 2050::/64 Up 00:02:36
Related Commands
• show running-cong track – displays conguration information about tracked objects.
• show track – displays information about tracked objects, including conguration, current state, and
clients which track the object.
• track interface ipv6 routing – congures object tracking on the routing status of an IPv6 Layer 3
interface.
• track ipv6 route metric threshold – congures object tracking on the threshold of an IPv6 route metric.
• track ipv6 route reachability – congures object tracking on the reachability of an IPv6 route.
track interface ipv6 routing
Congure object tracking on the routing status of an IPv6 Layer 3 interface.
Syntax
track object-id interface interface ipv6 routing
To return to the default setting, use the no track object-id command.
Parameters
object-id Enter the ID number of the tracked object. The range is 1 to 500.
interface Enter one of the following values:
Object Tracking
1023