Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1001

other-cong-ag

Enable the verication of the advertised other conguration parameter. If this command is not congured, the verication process is

bypassed.

Syntax

other-config-flag {on | off}

To reset the other conguration parameter, use the no other-config-flag {on | off} command.

Parameters

on Enter the keyword on to set the other-cong-ag value as ON.

o Enter the keyword off to set the other-cong ag value as OFF.

Defaults none

Command Modes POLICY LIST CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the Z9500.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.

Related Commands

• ipv6 nd ra-guard enable — Allows you to congure the RA guard related commands.

• ipv6 nd raguard policy policy-name — Denes the router advertisement (RA) guard policy name and

enter the RA guard policy conguration mode.

reachable-time

Enable the verication of the congured reachability time in the received RA packets.

Syntax

reachable—time value

To reset the advertised reachability time, use the no reachable-timevalue command.